|
|
Home > Peristaltic Pumps > CASED Heavy Duty 3000i Pumps
Programmable 3000i AU.UPC.3000.HD Autoclude Peristaltic Pump
Model Range: Heavy Duty 3000i, Pump Category: Cased
| |
- Brushless motor for 24 hr duty
- Variable speed / flow rate
- Manual, analogue or digital control
- Designed for heavy duty use
|
|
| |
Intelligent pump fitted with Autoclude 3000i pump head featuring stainless steel rollers and ball race bearings, change the tube size and the pump re-calculates flow rate and dose
parameters.
Features:
- User friendly keypad control
- Two line alpha numeric display
- Manual, analogue and digital control
- Vary flow rate or speed
- Tube size selector
- Single or repeat dosing
- Non-drip run back feature
- Calibrate for viscous liquids
- Low maintenance brushless motor
- Three roller rotor
- Stainless steel rollers with ball race bearings
|
Technical:
- Flow rates 55 to 3250 ml/min
- Speeds from 10 to 250 rpm
- Three tube sizes and five materials
- Remote speed control
0-10v d.c., 4-20mA or 10K Pot
- Remote Stop/Start/Reverse
- Volt free contacts or 3-36vdc signal
- RS232 computer signal interface
- 115/230v 50/60 Hz supply
|
|
| |
|
| |
|
| |
Specification | |
Materials | |
|
Power supply: |
100-120 / 220-240v
50/60Hz |
Enclosure: |
Noryl structured foam
Aluminium back plate |
|
Power Consumption: |
100 VA |
Finish: |
Polyurethane Paint |
|
Motor: |
24v d.c. 250 rpm
Brushless d.c. |
Pump Head: |
Al. Alloy
Polyester Paint
Stainless steel shafts
Stainless steel rollers
Ball race bearings |
|
Speed Range: |
10-250 rpm | | |
|
Enclosure: |
IP40 | | |
|
Temp Range: |
Operate 5°C to 40 C
Store 0°C to 50°C | | |
|
| |
Warranty |
Standards |
Directives |
|
Twenty four month guarantee period
Excluding consumables such as tube. |
IEC 335-1
EN 50081-1
EN 50082-1
EN 60529 IP40 |
89/392/EEC
89/336/EEC
73/23/EEC
2002/95/EEC |
Ordering Information
Programmable Control 3000i Peristaltic Pump
Part No. AU.UPC.3000.HD | | |
Tubing
Part Nos.
|
|
| |
p_3c_programmable-control_3000i_ds.pdf
p_3c_prog_control_3000i_im.pdf |
|
